 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STD95N4F3 STP95N4F3 N-channel 40 V, 5.0 m, 80 A, DPAK, TO-220 STripFETTM III Power MOSFET Features Type STD95N4F3 STP95N4F3 VDSS 40 V 40 V RDS(on) max < 5.8 m < 6.2 m ID 80 A 80 A Pw 110 W 110 W 3 1 2 Standard threshold drive 100% avalanche tested 3 1 TO-220 DPAK Applications Switching applications - Automotive Figure 1. Internal schematic diagram Description This STripFETTM III Power MOSFET technology is among the latest improvements, which have been especially tailored to minimize on-state resistance providing superior switching performance. Table 1. Device summary Marking 95N4F3 95N4F3 Package DPAK TO-220 Packaging Tape and reel Tube Order codes STD95N4F3 STP95N4F3 September 2009 Doc ID 13288 Rev 3 1/14 www.st.com 14 Contents STD95N4F3, STP95N4F3 Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 4 5 6 Test circuits .............................................. 8 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/14 Doc ID 13288 Rev 3 STD95N4F3, STP95N4F3 Electrical ratings 1 Electrical ratings Table 2. Symbol VDS VGS ID (1) Absolute maximum ratings Parameter Drain-source voltage (VGS=0) Gate-source voltage Drain current (continuous) at TC = 25 C Drain current (continuous) at TC = 100 C Drain current (pulsed) Total dissipation at TC = 25 C Derating factor Value 40 20 80 65 320 110 0.73 8 400 -55 to 175 Unit V V A A A W W/C V/ns mJ C ID IDM (2) PTOT dv/dt (3) EAS (4) Peak diode recovery voltage slope Single pulse avalanche energy Operating junction temperature Storage temperature Tj Tstg 1. Current limited by package 2. Pulse width limited by safe operating area 3. ISD 80 A, di/dt 400A/s, VDS V(BR)DSS, Tj Tjmax 4. Starting Tj = 25 C, ID = 40 A, VDD = 30 V Table 3. Symbol Rthj-case Rthj-a Rthj-pcb (1) Tl Thermal resistance Value Parameter TO-220 Thermal resistance junction-case max Thermal resistance junction-ambient max Thermal resistance junction-ambient max Maximum lead temperature for soldering purpose 300 62.5 50 1.36 DPAK C/W C/W C/W C Unit 1. When mounted on 1inch FR-4 2Oz Cu board Doc ID 13288 Rev 3 3/14 Electrical characteristics STD95N4F3, STP95N4F3 2 Electrical characteristics (TCASE=25 C unless otherwise specified) Table 4. Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on) Static Parameter Drain-source breakdown voltage Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 250 A, VGS= 0 VDS = Max rating, VDS = Max rating,Tc = 125 C VGS = 20 V VDS= VGS, ID = 250 A VGS= 10 V, ID= 40 A for DPAK VGS= 10 V, ID= 40 A for TO-220 2 5.0 5.4 Min. Typ. Max. Unit 40 10 100 200 V A A nA V m m 4 5.8 6.2 Table 5. Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd Dynamic Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-source charge Gate-drain charge Test conditions VDS = 25 V, ID=40 A VDS =25 V, f=1 MHz, VGS=0 VDD=20 V, ID = 80 A VGS =10 V Figure 14 Min Typ. Max. Unit 100 2200 580 40 40 11 8 54 S pF pF pF nC nC nC - 1. Pulsed: pulse duration = 300s, duty cycle 1.5% 4/14 Doc ID 13288 Rev 3 STD95N4F3, STP95N4F3 Electrical characteristics Table 6. Symbol td(on) tr td(off) tf Switching on/off (inductive load) Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions VDD=20 V, ID= 40 A, RG=4.7 , VGS=10 V Figure 16 VDD=20 V, ID= 40 A, RG=4.7 , VGS=10 V Figure 16 Min. Typ. 15 50 40 15 Max. Unit ns ns ns ns - - - - Table 7. Symbol ISD ISDM (1) Source drain diode Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current ISD=80 A, VGS=0 ISD=80 A, di/dt = 100 A/s, VDD= 30 V, Tj=150 C Figure 15 Test conditions Min. 45 60 2.8 Typ. Max. 80 320 1.5 Unit A A V ns nC A VSD (2) trr Qrr IRRM - 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration = 300 s, duty cycle 1.5% Doc ID 13288 Rev 3 5/14 Electrical characteristics STD95N4F3, STP95N4F3 2.1 Figure 2. Electrical characteristics (curves) Safe operating area Figure 3. Thermal impedance Figure 4. Output characteristics Figure 5. Transfer characteristics Figure 6. RDS(on) (m) 6.5 Static drain-source on resistance HV29000 Figure 7. Normalized BVDSS vs temperature ID=40A VGS=10V 6.0 5.5 TO-220 DPAK 5.0 4.5 0 20 40 60 80 ID(A) 6/14 Doc ID 13288 Rev 3 STD95N4F3, STP95N4F3 Figure 8. Gate charge vs gate-source voltage Figure 9. Electrical characteristics Capacitance variations Figure 10. Normalized gate threshold voltage vs temperature Figure 11. Normalized on resistance vs temperature Figure 12. Source-drain diode forward characteristics Doc ID 13288 Rev 3 7/14 Test circuits STD95N4F3, STP95N4F3 3 Test circuits Figure 14. Gate charge test circuit VDD 12V 2200 Figure 13. Switching times test circuit for resistive load 47k 100nF 1k RL VGS VD RG PW D.U.T. F 3.3 F VDD Vi=20V=VGMAX 2200 F IG=CONST 100 2.7k 47k PW 1k AM01469v1 D.U.T. VG AM01468v1 Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test switching and diode recovery times circuit A D G S B 25 D.U.T. A FAST DIODE B A L=100H B D G 3.3 F 1000 F L VD 2200 F 3.3 F VDD VDD ID RG S Vi D.U.T. Pw AM01470v1 AM01471v1 Figure 17. Unclamped inductive waveform V(BR)DSS VD Figure 18. Switching time waveform ton tdon tr toff tdoff tf 90% IDM 90% 10% ID VDD VDD 0 10% VDS 90% VGS AM01472v1 0 10% AM01473v1 8/14 Doc ID 13288 Rev 3 STD95N4F3, STP95N4F3 Package mechanical data 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. Doc ID 13288 Rev 3 9/14 Package mechanical data STD95N4F3, STP95N4F3 TO-220 mechanical data mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.48 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6 inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116 10/14 Doc ID 13288 Rev 3 STD95N4F3, STP95N4F3 Package mechanical data TO-252 (DPAK) mechanical data DIM. A A1 A2 b b4 c c2 D D1 E E1 e e1 H L L1 L2 L4 R V2 0o 0.60 0.20 8o 4.40 9.35 1 2.80 0.80 1 6.40 4.70 2.28 4.60 10.10 mm. min. 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 5.10 6.60 typ max. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 0068772_G Doc ID 13288 Rev 3 11/14 Packaging mechanical data STD95N4F3, STP95N4F3 5 Packaging mechanical data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 16.4 50 22.4 18.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0.795 0.645 0.724 1.968 0.881 BULK QTY 2500 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 B1 D D1 E F K0 P0 P1 P2 R W BASE QTY 2500 mm MIN. 6.8 10.4 1.5 1.5 1.65 7.4 2.55 3.9 7.9 1.9 40 15.7 16.3 inch MIN. MAX. 7 0.267 0.275 0.409 0.417 0.476 0.059 0.063 0.059 0.065 0.073 0.291 0.299 0.100 0.108 0.153 0.161 0.311 0.319 0.075 0.082 1.574 0.618 0.641 MAX. 10.6 12.1 1.6 1.85 7.6 2.75 4.1 8.1 2.1 12/14 Doc ID 13288 Rev 3 STD95N4F3, STP95N4F3 Revision history 6 Revision history Table 8. Date 22-Feb-2007 15-May-2007 10-Sep-2009 Dcument revision history Revision 1 2 3 First release Changes on applications Removed package, mechanical data: IPAK Changes Doc ID 13288 Rev 3 13/14 STD95N4F3, STP95N4F3 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 14/14 Doc ID 13288 Rev 3 |
Price & Availability of STP95N4F3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |